Swimming Pool Pumps

Product Details:

Applications:
Jet pumps for bath tubs, spa pools, Swimming pools, massage stations and Cleaning Systems.

Features:

• Wet ends made of high reinforced engineering thermal plastic with compact structure and corrosive-resistance.
• 1.5 inch Inlet and Outlet.
• High efficient structure design for diffusor and impeller to get higher performance.
• No contact between motor shaft and liquid.
• Motor / Pump shaft has no contact with the water.

Additional Information:

• Item Code: FCP-Series

Product Details:

We are an illustrious organization engaged in manufacturing and wholesaling a commendable range of Swimming Pool Cleaning Equipment, Swimming Pool Light, Swimming Pool Loungers and much more. Our raw material is procured from the most renowned vendors of the market. We make use of this high-grade raw material in the production process. Our products are widely sought after by clients for adding elegance to the pool area. Clients can avail these products from is in varied specifications at leading market prices.

Additional Information:

• Delivery Time: Immediate
• Packaging Details: Single

Product Details:

Modal: HWCC04003-02

Singal Stage Certifugal Pumps With Complete Drainage Device.

Inbuilt counterflow System:
This jet Stream is for easy installation. It is possible to regulate The jet Strength and air suction. On the Nozzle of 40mm In diameter, Which is directionally adjustable. The Nozzle, Suction And Phneumatic Switch are Positional In The Front Cover Panel of The equipment. Complete Flow System Include:-
Counter Flow Nozzle 40mm Front Cover Pannelk Attreactive Design Pool wall lead through pump Electro pneumatic Switch safety Element PVC Fitting

Output:- 4KW / 5.5HP 220 / 380V / 50HZ
Q.MAX:- 1167 I/min
H.MAX:- 14.5m
R.P.M:- 2850 r/min IP55
Size:- 75mm X 75mm

Motor:

Asynchronous, Two Poles, IP 55 Protection
Class F Insultion

Material:

Suction and Discharge Mountings In Polyproplier
Motor Shaft Stainless Steel 304

Product Details:

NEW "H-PC" series swimming pool pump is designed for medium head installation in medium or domestic pool 1.5 inch suction and discharge port with transparent lid. It operates a low decibel and easy maintenance.

Product Details:

Motor:

1. 2-pole induction motor Single-phase : 220-240/50Hz Single-phase with thermal protector T.I.
2. Capacitor inset
3. Insulation class F
4. Protection IPX5
5. Continuous duty

Product Details:

Motor

1. Asynchronous, two poles
2. IP 55 protection
3. class F Insulation
4. Continuous operation
5. Single phase version built in thermal protection

Materials
1. Self priming pump
2. Injected thermo plastic pump casing
3. filter basket in white color injected plastic material
4. prefilter lid in transparent polycarbonate
5. Stainless steel studs
6. Impeller shaft i stainless AISI 420
7. Mechanical seal in graphite and SIC
8. Motor housing in aluminum L 2521

Product Details:

Materials 

1. Self priming pump
2. Injected thermo plastic pump casing
3. Filter basket in white color injected plastic material
4. Prefilter lid in transparent polycarbonate
5. Stainless steel studs
6. Impeller and seal mounting in PPO
7. Motor shaft in stainless steel AISI 420
8. Mechanical seal in graphite and SIC
9. Motor housing in aluminium L2521

Motors
1. Asynchronous, two poles
2. IP 55 protection
3. Class F insulation
4. Continous operation
5. Single phase version built in thermal protection

Product Details:

Swimming Pool Pumps offered comprise high performance based swimming pool pumps to pick from.

Features

• Made available in non-corrosive material finish
• Provide for extremely quiet running support

Specifications

• Comes with superior self-priming capability
• Comes with internal heat sink for ensuring maximum cooling capability
• Comes with over-load protector for safe and long working life
• 2-pole induction motor support
• Feature presence of wear-resisting mechanical seal
• Comes with self-priming functions
• Comes with maximum suction support of 1.5m
• Comes with low noise standard motors
• Have single phase motor installation thermal protector
• Motor coming with high temperature resistant bearing for reliable and durable usage
• Backed by CE and other industry certifications

Product Details:

Applications:
Jet pumps for bath tubs, spa pools, Swimming pools, massage stations and Cleaning Systems.

Features:

• Wet ends made of high reinforced engineering thermal plastic with compact structure and corrosive-resistance.
• 1.5 inch Inlet and Outlet.
• High efficient structure design for diffusor and impeller to get higher performance.
• No contact between motor shaft and liquid.
• Motor / Pump shaft has no contact with the water.

Product Details:

Applications:
Jet pumps for bath tubs, spa pools, Swimming pools, massage stations and Cleaning Systems.

Features:

• Wet ends made of high reinforced engineering thermal plastic with compact structure and corrosive-resistance.
• 1.5 inch Inlet and Outlet.
• High efficient structure design for diffusor and impeller to get higher performance.
• No contact between motor shaft and liquid.
• Motor / Pump shaft has no contact with the water.

Product Details:

Operative Conditions :

1. Liquid temperature from +5°C ~ +60°C
2. Ambient temperature up to 50°C
3. Max. working pressure : 3 bar
4. Available in 0.75 HP to 1.0 HP
5. Single Phase
6. Inbuild Prefilter basket
7. Self Priming Pump
8. Pipe connection size is 50 mm

Product Details:

Pole induction motor Single-phase : 220-240/50Hz Single-phase with thermal protector

1. Capacitor inset
2. Insulation class F
3. Protection IPX5
4. Continuous duty

Features
1. Wet ends made of high reinforced engineering thermal plastic with compact structure and corrosive-resistance.
2. 1.5 inch Inlet and Outlet
3. High efficient structure design for diffusor and impeller to get higher performance
4. No contact between motor shaft and liquid.
5. . Motor / Pump shaft has no contact with the water
6. Continious Operations

Product Details:

Applications:Jet pumps for bath tubs, spa pools, Swimming pools, massagestations and Cleaning Systems.
Features:1. Wet ends made of high reinforced engineering thermal plasticwith compact structure and corrosive-resistance.

2. 1.5 inch Inlet and Outlet.

3. High efficient structure design for diffusor and impeller to get higher performance.

4. No contact between motor shaft and liquid.

5. Motor / Pump shaft has no contact with the water.

Motor:1. 2-pole induction motor Single-phase : 220-240/50Hz Single-phase with thermal protector2. Capacitor inset3. Insulation class F4. Protection IPX55. Continuous duty

MAKE HALBERT JAPAN

Product Details:

Applications:
Jet pumps for bath tubs, spa pools, Swimming pools, massage stations and Cleaning Systems.

Features:

• Wet ends made of high reinforced engineering thermal plastic with compact structure and corrosive-resistance.
• 1.5 inch Inlet and Outlet.
• High efficient structure design for diffusor and impeller to get higher performance.
• No contact between motor shaft and liquid.
• Motor / Pump shaft has no contact with the water.

Product Details:

We are recognized as the prominent firm of optimum quality Swimming Pool Pump.

Features:

• Excellent functionality
• Longer service life
• Trouble free performance

Product Details:

Hi Pressure SPA PUMP available with its different varient

1. Stainless Steel Studs.
2. Injected Thermo Plastic Pump Casing.
3. Suction and Discharge in polypropylene.
4. Impeller in PPO.
5. Mechanical Seal in SIC & SIC.
6. IP 55 Insulation.
7. Moter Housing in aluminium L 2521.
8. Continues Operation.
9. Application for Spa, Jacuzzi, and Bath Tub.

WORKING CONDITIONS:

Medium temperature: 5-50Co

Environmental temperature : < 40 Co

Max. working pressure: 0.3 MPa

PRODUCT FOCUS:

Best working point, large flow , high efficiency. Electric pump over-currant componenets using high-strength engineering plastic, with high-quality wear-resistant mechanical seal; Three phase motor apply for gasket and tread to avoid impeller reversal and loose; The stator is applied by molding process with resistance. Moisture. heat security,90 frame equipped with specialized plastic mounting bracket pump apple for low noise standard motor. Single-phase with thermal protector from TI, USA; Motor is with high temperature bearings, long operating life with reliability and durability; Complete separartion of water and the axis, safe and reliable ; Insulation class F, Protection IPX5. The pump obtained the certification of CE.

 

Product Details:

We can provide electronic dosing pump to our clients in a vareirty of capacities to meet their requirement for swimming pool industry.

Product Details:

Chlorine Dosing Pump

Product Details:

Materials - : 

1. Self priming pump
2. Injected thermo plastic pump casing
3. Stainless steel studs
4. Motor Shaft in stainless steel AISI 420
5. Impeller in PPO
6. Mechanical seal in graphite and ceramic
7. Motor Housing in aluminum

1. Bulit in pneumatic switch for on & off underwater
2. Asynchronous , two poles
3. IP 55 protection
4. Class F insulation
5. Contiuous operation
6. Single phase version built in thermal protection

Product Details:

Appearance Clear, colourless to slight yellowish liquid

Strength 30% w/w minimum

Fe content 0.02% w/w maximum

NEW H-PB series heavy duty pump delivers high flow and energy efficiency ultra performance It is suitable or commercial swimming pool 2 inch suction . Ring lock seal design to ellminate suction leaks and to maximize suction efficiency.

 

 

 

 

 

Product Details:

Applications:

Jet pump for bath tubs, spa pools, swimming pools, massage stations and cleaning sysytems.

Features:

1. Motor / Pump shaft has no contact with the water.
2. Total electrical separation.
3. 2.2L pre filter.
4. 2" Inlet & outlet.

Operative Conditions:

Liquid temperature from +5°C ~ +60°C
Ambient temperature up to 50°C
Max. working pressure : 3 bar

Motor:

2-pole induction motor single-phase : 220-240/50HZ single-phase with thermal protector T.I.
Capacitor Inset
Insulation class F
Protection IPX5

 

Product Details:

Applications:
Jet pumps for bath tubs, spa pools, Swimming pools, massage stations and Cleaning Systems.

Features:

• Wet ends made of high reinforced engineering thermal plastic with compact structure and corrosive-resistance.
• 1.5 inch Inlet and Outlet.
• High efficient structure design for diffusor and impeller to get higher performance.
• No contact between motor shaft and liquid.
• Motor / Pump shaft has no contact with the water.