DS Water Technology
Rohini, New Delhi, Delhi
GST No. 07BIUPS1896K1Z6
TrustSEAL Verified
Call 0804896234368% Response Rate
SEND EMAIL
Product Details:
| Product Type | Pool Heater |
| Brand | Halbert |
| Model Name/Number | HHPD4.5, HHPD9.5, HHPD12.5, HHPD17,HHPD21, HHPD26, HHPD31 |
| Power | 0.85kw-5.64kw |
| Usage/Application | Commercial |
| Material | anti-UV plastic ABS corrosion resistant casing material with injection model or normal plastic model |
| Power Source | Electric |
| Voltage | 220-240V/1PH/50HZ or 380-400V/3PH/50HZ |
Patented high-performance titanium exchanger has more stable performance and greatly resist erosion of chlorine ion water, solid and durable.
Exterior is anti-UV plastic ABS corrosion resistant casing material with injection model or normal plastic model.
By using high-heat exchanger technology, 65-80% of running cost can be saved compared with other heating machines. It consumes 1kw to produce about 5.5kw heating capacity, possessing high COP.
Heating and cooling with reversible defrosting.
Remote and intelligent controller design with Celsius of fahrenheit temperature display for options.
LCD or colorful LED controller for options Super power failure memory.
Flow switch built-in to avoid the low level water or devoid of water.
Advanced technology to mute noise from compressors and fans.
Product Details:
| Minimum Order Quantity | 1 Unit |
| Voltage | 220-240V |
| Size | 940x410x600 mm |
| Weight | 55 Kg |
| Application | Villa Family,Sauna and Swimming Pool |
Product Details:
| Voltage | 220-240 V |
| Housing Material | Galvanized Steel |
| Usage | Swimming Pool |
Product Details:
| Usage/Application | small pools, jacuzzi and spa system |
| Material | Powder Coated/ Stainless Steel Cabinet |
| Brand | Halbert |
| Finishing | Smooth and shiny |
| Power Source | Electric |
| Capacity | 9kw, 12kw, 15kw, 18kw, 20kw, 24kw, 30kw, 35kw, 40kw, 45kw, 50kw, 55kw, 60kw. |
The Halbert Spa Heaters are intended for use small pools, jacuzzi and spa system. It will maintened the water at any relaxing and an enjoyable temperature.
Product Details:
| Material | Exterior is anti-UV plastic ABS corrosion resistant casing material with injection model or normal p |
| Brand | Halbert |
| Usage/Application | Swimming pool Heater |
| Voltage | 380-400V |
| Features | Effective and durable |
| Frequency Hz | 50HZ |
Patented high-performance titanium exchanger has more stable performance and greatly resist erosion of chlorine ion water, solid and durable.
Exterior is anti-UV plastic ABS corrosion resistant casing material with injection model or normal plastic model.
By using high-heat exchanger technology, 65-80% of running cost can be saved compared with other heating machines. It consumes 1kw to produce about 5.5kw heating capacity, possessing high COP.
Heating and cooling with reversible defrosting.
Remote and intelligent controller design with Celsius of fahrenheit temperature display for options.
LCD or colorful LED controller for options
Super power failure memory
Flow switch built-in to avoid the low level water or devoid of water.
Advanced technology to mute noise from compressors and fans.
Product Details:
| Product Type | Pool Heater |
| Brand | Halbert |
| Power | 230V single phase, 400V three phase or 230V three phase |
| Usage/Application | Pool Heating |
| Power Source | Electric |
| Phase | Single or 3 phase |
| Flow Range | Minimum flow:- 3-kW to 6-kW = 1m3/h; 9-kW to 24-kw = 4m3/h ; Maximum flow:- 17m3/h |
| I Deal In | New Only |
| Heating Elements | Incoloy 825 or Titanium, high MgO compaction. |
| Flow tubes | BS 316 Stainless Steel or Titanium |
| Control thermostat: | 0 > 40 DegreeC (1 DegreeC differential) |
Features:
Fully equipped
Easy Installation
Robust, durable construction
Analogue control with 1C Differential
Incoloy 825 or Titanium heating elements
316 Stainless Steel or Titanium flow tube
Ultra-reliable flow switch allows safe operation as low as 1,000 ltr/h
May be floor or wall mounted using swivel foot
Control thermostat and safety thermal cut out (manual reset)
3 years conditional warranty
Construction
The ELECRO EVOLUTION pool heater is manufactured from top quality components and materials at the Elecro works in Hertfordshire, England.
Construction consists of a flow tube which is fitted with Inlet and Outlet ouldings manufactured from specially formulated polymer alloy material. Universal ABS unions are provided to allow solvent weld connection to the inlet and outlet pipe work. The outlet moulding accommodates a reversible flow switch with a gold tipped reed, and Titanium pin.
The heater is supported on two swivel feet; these can swivel to permit either wall or floor mounting. The heater control components are positioned on the front face of the casing. The water inlet and outlet fittings can facilitate connection to either metric or imperial standard pipe. The inlet moulding has been designed to ensure full immersion of the elements, greatly reducing the risks of air locking.
Operation
The desired pool temperature can be easily set on the ELECRO EVOLUTION heater using the panel-mounted thermostat dial. The single or three-phase power is supplied through a top quality Schneider contactor. Safety and equipment protection is provided by the highly reliable flow switch. Over-temperature protection is provided by the thermal cut out (manual reset).
Specification & Models
Power supply: 230V single phase, 400V three phase or 230V three phase
Flow requirements: Minimum flow:- 3-kW to 6-kW = 1m3/h
9-kW to 24-kw = 4m3/h
Maximum flow:- 17m3/h
Heating Elements: Incoloy 825 or Titanium, high MgO compaction.
Flow tubes: BS 316 Stainless Steel or Titanium
Control thermostat: 0 > 40°C (1°C differential)
Safety thermal cut out: 55°C (manual reset)
Flow switch: Gold tipped reed switch with Titanium fulcrum pin
Wiring: High temperature, silicone sheathed, multi-strand copper conductors
Contactor: Schneider
Seals: Special formula high temperature polymer
Water connections: 1½” BSP female thread supplied with 1½” to 50mm ABS unions
Working pressure: 4 barg maximum
Mounting: Floor or wall mounting
Standards compliance: European Electromagnetic Compatibility directive 89/336/EEC and 93/068/EEC
Harmonised Standards: EN 55014 – EN55104, EN 5501, EN 5502, CEI 801-4, CEI 801-2, CEI 801-3 The European Low Voltage Directive 72/23/EEC The Harmonised Standard EN 60335-2-35
Product Details:
| Minimum Order Quantity | 1 Piece |
| Phase | 3 Phase |
| Voltage | 400 V |
| Power | 15 kW |
Incorporates through techniques, our company is able to manufacture and and supply an excellent quality Swimming Pool Heater for our valuable clients. The offered heater is manufactured as per the guidelines laid down by our ingenious professionals by utilizing bets-in-class components and contemporary machinery at our sophisticated production unit as per set industry standards. Tour provided heater is used to make the water of swimming pool warm. Our clients can purchase this Swimming Pool Heater from us at marginal prices within promised time frame.
Features
Hassle-free operations
Low power consumption
Sturdy construction
Longer shelf life
Swimming Pool Heaters
Pahlen digital electric heater 3-15kW L flow 50mm (1/2ACa,-) pipe for fast and flexible heating of swimming pools
Pahlen have developed a new series of electric heaters with digital control, where the desired pool temperature can easily be set and the current pool temperature is shown in a LED display.
In addition to an overheating protection and a flow switch, the heater has built-in contactors, that simplifies the connection of the heater.
The heating element is made of Incoloy 825 or titanium ASTM grade 1 and the casing of the heater is made of glassfibre reinforced polypropylene.
Additional Information:
Product Details:
| Tank Material | Stainless Steel |
Product Details:
| Minimum Order Quantity | 1 Unit |
| Voltage | 380 V |
| Power Source | Electric |
| Power | 24 kW |
| Working Temperature | -20 to 43 Deg C |